Brushless revo 3.3 sorry for the bad quality brushless converted revo 3.3 with the tekno conversion kit gearing is 40T/15T pinion 9xl motor 2 X 2s 5000mah ftx lipos spektrum radio gear Ace DS1015 steering servo mamba max esc 30% punch with brushless fan and BEC thanks for watching
http://www.youtube.com/watch?v=NbtwAlWI8q8&hl=en
compact fluorescent grow light sealed [...]
homemade single phase brushless motor from a 1.83mm diameter x 1mm long magnet. weight is 35mg with prop. prop is spinning at about 36000 RPM. this was eventually used to power this plane: www.youtube.com this works similar to a computer cooling fan, which is brushless but only has two wires (+,-). on brushless motors a [...]
The Stormlaunchers flew strangely, like a piece of cardboard, but still were lots of fun, once you learned how to fly them. I liked mine a lot, but eventually the radios, batteries, and props deteriorated. So I decided to see if I could put one back in the air with my own radio and Brushless [...]
Continue reading about Give your old Stormlauncher a Brushless Ducted Fan and major control Mods.
Consider this. The tail has to quickly respond on the commands of the gyro and the rudder/yaw commands fed by the user. A motor driven tail has to rely on “quick” motor speed changes for a responsive yaw control. Speed changes has to be “quick” on both spooling up (counteracting torque for a positive yaw) [...]
Continue reading about HoneyBee CP2 Brushless Direct Drive Tail with Tail Servo
Check out my new rebuilt Tacón brushless motor to RWD Tamiya TA03. Dog bones are bent a little, so there is some vibration in the left rear wheel. The tires are radial tires, but not glued on the rims. They are almost completely bald, so traction is less than ideal. This engine seems to run [...]
Continue reading about 5900kv TACON Brushless motor + 60A eZRun ESC + 3S Turnigy LiPo test
admin